Qhov zoo
- Siab yooj
- Ua kua muag zoo
- Muaj tseeb heev
- Cov xim dawb zoo heev
Ideal Applications
- Nkawm khau
- Prototypes xav tau roj hmab zoo li cov khoom siv
- Mos dawb zaub qauv
Cov khoom ua kua
| Qhov tshwm sim | Dawb | Dp | 13.5 mJ/cm2 | [kev tawm tsam tseem ceeb] |
| viscosity | 560 hli @ 30 ℃ | Ec | 0.125 hli | [slope of cure-depth vs. In (E) nkhaus] |
| Qhov ntom | 1.1g / cm3 | Lub tsev txheej thickness | 0.08-0.12 hli |
| Mechanical Properties | UV Postcure | |
| Kev ntsuas | KEV TIV THAIV | VALUE |
| Hardness, Ntug D | ASTM D 2240, ASTM D 2240, ASTM D 2240 | 72-78 : kuv |
| Flexural modulus, Mpa | ASTM D 790 Cov khoom siv raw khoom | 2,680-2,775 Ib |
| Flexural zog, Mpa | ASTM D 790 Cov khoom siv raw khoom | 65-75 ib |
| Tensile modulus, MPa | ASTM D 638 (Tshooj 638) | 2, 170-2, 385 |
| Tensile zog, MPa | ASTM D 638 (Tshooj 638) | 25-30 |
| Elongation thaum so | ASTM D 638 (Tshooj 638) | 12-20% |
| Impact zog, notched lzod, J / m | ASTM D 256 | 58-70 ib |
| Thaum tshav kub kub deflection, ℃ | ASTM D 648 @ 66 PSI | 50-60 |
| Kev hloov iav, Tg | DMA, E”peak | 55-70 : kuv |
| Qhov ceev, g / cm3 | 1.14-1.16 Nws | |
Pom zoo kub rau kev ua thiab khaws cia ntawm cov khoom saum toj no yuav tsum yog 18 ℃ -25 ℃.
1e aoned te tcreo orertlroleoep ndecerece.rhe syes d wbah ma ey dpnton nbirdualrmathrero.srg reorot-rg rcices.The shet es gie in aboe sfor niometon purpsis ry andovs rot MS cortitutealeall
