Qhov zoo
- Muaj tseeb thiab muaj zog toughness
- Ua tau zoo heev
- Fine nto kev ntxhib los mos
- Zoo noo noo tsis kam
- Yooj yim los ntxuav thiab ua kom tiav
Ideal Applications
- Muaj nuj nqi prototypes
- Lub tswv yim qauv
- Tsawg ntim ntau lawm qauv
- Automotive, aerospace, architecture, kev siv hluav taws xob
Technical Datasheet
| Cov khoom ua kua | Optical Properties | ||
| Qhov tshwm sim | Opaque Dawb | Dp | 0.135-0.155 hli |
| viscosity | 355-455 cps @ 28 ℃ | Ec | 9-12 mJ/cm2 |
| Qhov ntom | 1.11-1.14g / cm3 @ 25 ℃ | Lub tsev txheej thickness | 0.05 ~ 0.15 hli |
| Mechanical Properties | UV Postcure | |
| Kev ntsuas | KEV TIV THAIV | VALUE |
| Hardness, Ntug D | ASTM D 2240, ASTM D 2240, ASTM D 2240 | 76-82 : kuv |
| Flexural modulus, Mpa | ASTM D 790 Cov khoom siv raw khoom | 2,690-2,775 Ib |
| Flexural zog, Mpa | ASTM D 790 Cov khoom siv raw khoom | 68-75 ib |
| Tensile modulus, MPa | ASTM D 638 (Tshooj 638) | 2, 180-2, 395 |
| Tensile zog, MPa | ASTM D 638 (Tshooj 638) | 27-31 : kuv |
| Elongation thaum so | ASTM D 638 (Tshooj 638) | 12-20% |
| Impact zog, notched lzod, J / m | ASTM D 256 | 58-70 ib |
| Kub deflection kub, ℃ | ASTM D 648 @ 66 PSI | 55-65 |
| Kev hloov iav, Tg | DMA, E”peak | 55-70 : kuv |
| Qhov ceev, g / cm3 | 1.14-1.16 Nws | |
Pom zoo kub rau kev ua thiab khaws cia ntawm cov khoom saum toj no yuav tsum yog 18 ℃ -25 ℃.
1e aoned te tcreo orertlroleoep ndecerece.rhe syes d wbah ma ey dpnton nbirdualrmathrero.srg reorot-rg rcices.The shet es gie in aboe sfor niometon purpsis ry andovs rot MS cortitutealeall
