Technical Datasheet
- Praeclara perspicuitas
- Optime humiditas et humiditas resistentia
- Ieiunium aedificare et facile fifinish
- Accurate et dimensiva stabilis
Specimen Applications
- Automotiva lentium
- Utres et fistulae
- lenta eget prototypa
- Transparens propono exempla
- Fluidum analysis flflow
Technical Data-sheet
| Liquid Properties | Optical Properties | ||
| Aspectus | Patet | Dp | 0.139-0.155 mm |
| Viscositas | 325 -425cps @ 28 | Ec | 9-12 mJ/cm2 |
| Densitas | 1.11-1.14g/cm3 @ 25 | Aedificationem accumsan crassitudine | 0.1-0.15mm |
| Mechanica Properties | UV Postcure | |
| MENSURA | PROBATIO RATIO | PRETIUM |
| Duritia, Shore D | ASTM D 2240 | 72-78 |
| Modulus flexilis, Mpa | ASTM D 790 | 2,680-2,775 |
| Flexurae vires , Mpa | ASTM D 790 | 65- 75 |
| Modulus tensile, MPa | ASTM D 638 | 2,170-2,385 |
| Roboris distrahentes , MPa | ASTM D 638 | 25-30 |
| Prolongatio ad intermissum | ASTM D 638 | 12 -20% |
| Impact vires, lzod retusa, J/m | ASTM D 256 | 58 - 70 |
| Declinatio caloris temperatus, ℃ | ASTM D 648 @66PSI | 50-60 |
| Speculum transitus, Tg | DMA，E "apicem" | 55-70 |
| Densitas , g/cm3 | 1.14-1.16 | |
Commendatur temperatus ad processus ac reponendos resinae superioris debet esse 18℃-25℃
Praedicta notitia fundata est in nostra cognitione et experientia, cuius valores variari et pendent a singulis processui machinae et exercitiis post-curandis.Salus data supra data est solum ad informationem proposita
legaliter obligans MSDS non constituit.
