English

Matla a Phahameng a Mechanical Leseli Weight Vacuum Casting PP joalo ka

Matla a Phahameng a Mechanical Matla a Leseli Weight Vacuum Vacuum Casting PP joalo ka Setšoantšo se Featured
  • Matla a Phahameng a Mechanical Leseli Weight Vacuum Casting PP joalo ka

Tlhaloso e Khutšoanyane:

Ho hlahisa likarolo tsa prototype le li-mock-ups tse nang le thepa ea mochini joalo ka PP le HDPE, joalo ka phanele ea lisebelisoa, bumper, lebokose la lisebelisoa, sekoaelo le lisebelisoa tse thibelang ho thothomela.

• 3-likarolo tsa polyurethane bakeng sa vacuum casting

• bolelele bo phahameng

• Ho sebetsa habonolo

• Flexural modulus e fetolehang

• Ho hanyetsa tšusumetso e phahameng, ha ho na ho robeha

• Ho tenyetseha hantle


Khoasolla Leqephe la Lintlha

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

UP 5690-W or-K POLYOL UP 5690   ISOCYANATE UP 5690 C MIXED
Sebopeho Polyol Isocyanate Polyol
Kopanya karo-karolelano ka boima ba 'mele 100 100 0-50
Karolo metsi metsi metsi metsi
Mmala W= MosweuK= Motsho E senang mmala Lebese le lesoeu AW/B/C=Tsweu AK/B/C=E Ntsho
Viscosity ho 23°C (mPa.s) BROOKFIELD LVT 1000 - 1500 140 - 180 4500 - 5000 500 - 700
Viscosity ho 40°C (mPa.s) BROOKFIELD LVT 400-600 - 2300 - 2500 300 - 500
Matla a khoheli a khethehileng ho 25°C Matla a khoheli a khethehileng a folisitsoeng

sehlahisoa ka 23°C

 ISO 1675 :1975 ISO 2781 :1988 1.06- 1.15- 1.06- -1.13
Bophelo ba pitsa ka 25°C ka 100 g (metsotso) 10 - 15
Bophelo ba pitsa ka 40°C ka 100 g (metsotso) 5-7

MAEMO A HO SEBELISA (Mochini oa Vacuum casting)

• Preheat isocyanate ho 23 - 30°C ha e ka bolokoa ka tlase ho 20°C.

• Preheat polyol le karolo ea C ho ea ho 40°C pele u sebelisa.Hoa hlokahala ho hlohlelletsa polyol ho fihlela 'mala le likarolo li fetoha homogeneous.

• Leka likarolo ho ea ka karolelano ea ho kopanya, kenya isocyanate ka senoelo se ka holimo, eketsa karolo ea C ho polyol ho premix.

• Tšela isocyanate ka polyol (e nang le Karolo ea C) 'me u kopanye metsotso e 1 - 2 ka mor'a ho ntša metsi ka metsotso e 10 ka ho arohana.

• Kenya ka tlas'a vacuum ka har'a hlobo ea silicone e futhumetseng pele ho 70°C.

• Hlakola ka mor'a metsotso e 60 - 90 ka 70°C (Ha Karolo ea C e sebelisoa haholo, ho hlokahala nako e telele ea ho theola).

A/B/C 100/100/0 100/100/20 100/100/30 100/100/50
Ho thatafala ISO 868: 2003 Shore D 83 80 78 75
Matla a tšepe ISO 527 : 1993 MPa 35 30 28 25
Matla a flexural ISO 178: 2001 MPa 50 35 30 20
Flexural modulus ISO 178: 2001 MPa 1300 1000 900 600
Elongation nakong ya khefu ISO 527 : 1993 % 50 60 65 90
Matla a amang(CHARPY)

E sa ngolisoang mehlala

 ISO 179/2D : 1994 KJ/m2 100 90 85 75
A/B/C 100/100/0 100/100/20 100/100/30 100/100/50
Thempereichara ea phetoho ea khalase (Tg) (1) °C 85 78 75 65
Ho honyela ka mola % 0.35 0.35 0.35 0.35
Nako ea ho theola (2 - 3mm) ho 70°C min 60-90

Karolelano litekanyetso fumanoa on maemo mehlala / Ho thatafatsa 16hr at  80°C kamora nyenyefatsa.

Ho Tšoara Litlhokomelo

Litlhokomelo tse tloaelehileng tsa bophelo bo botle le polokeho li lokela ho hlokomeloa ha u sebetsana le lihlahisoa tsena:

Netefatsa moea o motle

Apara liatlana, likhalase tsa tšireletso le liaparo tsa tšireletso.

Ho fumana lintlha tse ling, ka kopo sheba leqephe la lintlha tsa polokeho ea sehlahisoa.

Maemo a polokelo

Bophelo ba lishelefo ke likhoeli tse 6 sebakeng se omileng le ka har'a lijana tse sa buloang tsa pele mocheso o pakeng tsa 15 le 25° C. Lekotikoti lefe kapa lefe le bulehileng le tlameha ho koaloa ka thata tlas'a kobo e ommeng ea nitrogen.

  • E fetileng:
  • E 'ngoe:

    • LIHLAHISO TSE HLAHANG

    Tobetsa Enter ho batla kapa ESC ho koala