Melemo
• Matla a phahameng le ho tšoarella
• Mefuta e mengata ea lisebelisoa
•Bokaholimo bo botle le ho nepahala ha karolo e kholo
• Ho mamella mocheso ho fihla ho 90°C
• Thermoplastic-joalokatshebetso, chebahalo le maikutlo
Likopo tse Ntle
• Customized qetellong-sebelisa likarolo
• Li-prototypes tse thata, tse sebetsang
• Ka tlas'a hood likarolo tsa likoloi
• Teko e sebetsang bakeng sa sepakapaka
•Lihokelo tsa molumo o tlase bakeng sa lisebelisoa tsa elektroniki
Letlapa la lintlha tsa tekheniki
| LiquiD Properties | Lintho tsa OpTicAl | |||
| Ponahalo | boputsoa-botsho | Dp | 4.2 lik'hilograma | [slope of cure-depth vs. In (E) curve] |
| Viscosity | ~350 cps @ 30°C | Ec | 10.5 mJ/cm² | [ho pepeseha ha bohlokoa] |
| Botenya | ~1.13 g/cm3 @ 25°C | Botenya ba lera la mohaho | 0.08-0.012mm | |
| Thepa ea Mechini | UV Postcure | UV & Thermal Postcure | |||
| Mokhoa oa ASTM | Tlhaloso ea Thepa | Metric | Moemphera | Metric | Moemphera |
| D638-14 | Tensile Modulus | 2,310 MPa | 335 lik'hilograma | 2,206 MPa | 320 ksi |
| D638-14 | Matla a Tensile ho Kotuloa | 46.9 MPa | 6,8 lik'hilograma | 49.0 MPa | 7.1 lik'hilograma |
| D638-14 | Elongation at Break | 24% | 17% | ||
| D638-14 | Elongation at Yield | 4.0% | 5.7% | ||
| D638-14 | Karolelano ea Poisson | 0.45 | 0.44 | ||
| D790-15e2 | Flexural Matla | 73.8 MPa | 10.7 lik'hilograma | 62.7 MPa | 9.1 lik'hilograma |
| D790-15e2 | Flexural Modulus | 2,054 MPa | 298 ksi | 1,724 MPa | 250 lik'hilograma |
| D256-10e1 | Izod Impact (Notched) | 47.5 J/m | 0.89 ft-lb/in | 35.8 J/m | 0.67 ft-lb/in |
| D2240-15 | Ho thatafala (Lebopo D) | 83 | 83 | ||
| D570-98 | Ho Monyeha ha Metsi | 0.75% | 0.70% | ||
