UkuSebenza Okulungileyo IiPropati zokuzithambisa ngeVacuum yokuCasa iPOM

UkuSebenza Okulungileyo Ukuzithambisa IiPropati zeVacuum Ukugalela iPOM Umfanekiso obonakalisiweyo

Inkcazelo emfutshane:

Iza kusetyenziswa nge-vacuum casting kwi-silicone molds yokwenza iiprototype kunye ne-mock-ups ezineempawu zomatshini ezifana ne-thermoplastics efana ne-polyoxymethylene kunye ne-polyamide.

• High flexural modulus of elasticity

• Ukuchaneka okuphezulu kokuzala

• Ifumaneka kwireactivity emibini (4 kunye ne-8 min.)

• Inokufakwa imibala ngokulula nge-CP pigments

• Ukudilizwa ngokukhawuleza

Thumela i-imeyile kuthi Ukukhuphela iPhepha leDatha

Iinkcukacha zeMveliso

Iithegi zeMveliso

			INXALENYE APX 245	INXALENYE B PX 245 - 245/L	MIXING
Ukuqamba			ISOCYANATE	IPOLYOL
Ukuxuba umlinganiselo ngobunzima			100	40
Umba			ulwelo	ulwelo	ulwelo
Umbala	PX 245/BPX 245/LB		ngwevu	bluishcolorless	ngaphandel uBumhlophe
Viscosity kwi-25°C (mPa.s)		BROOKFIELD LVT	800	1,000	2,200 (2)
Umxhuzulane okhethekileyo kuma-25°C Umxhuzulane okhethekileyo kuma-23°C		ISO 1675 :1985ISO 2781 :1996	1.34-	1.10-	-1.22
Ubomi bembiza kwi-25°C kwi-140g (min.)		PX 245PX 245/L			4 8

Iimeko zokuLungisa iVacuum Casting

• Fudumeza omabini la malungu (isocyanate kunye nepolyol) kwi-23°C xa ugcinwe kubushushu obuphantsi.

• Kubalulekile : Shukumisa ngamandla inxalenye A phambi komlinganiselo ngamnye.

• Beka ubunzima kuwo omabini la malungu.

• Emva kokucoca imizuzu eli-10 phantsi kwevacuum mix for

Umzuzu o-1 kunye ne-PX 245

Imizuzu emi-2 ngePX 245/L

• Gcoba ngaphantsi kwevacuum kwisingundo se-silicone, ebefudula sifudunyezwa ngama-70°C.

• Dibanisa emva kwemizuzu engama-30 ubuncinane kwi-70°C (vumela indawo ukuba iphole phambi kokudilizwa).

Ukuphatha imiGaqo

Izithintelo zempilo kunye nokhuseleko eziqhelekileyo kufuneka ziqwalaselwe xa uphethe ezi mveliso:

• qinisekisa ukungena komoya kakuhle

• nxiba iiglavu kunye neendondo zokhuseleko

Ngolwazi oluthe vetshe, nceda uqhagamshelane nephepha ledatha yokhuseleko lwemveliso.

Imodyuli ye-Flexural ye-elasticity		ISO 178 :2001	MPa	4,500
Amandla e-Flexural		ISO 178 :2001	MPa	150
Tensile strength		ISO 527 :1993	MPa	85
Ukwandiswa ngexesha lekhefu kuxinzelelo		ISO 527 :1993	%	3
Amandla empembelelo yeCharpy		ISO 179/1eU : 1994	kJ/m2	30
Ukuqina	- kwi-23 ° C - kwi-80 ° C	ISO 868 :2003	Unxweme D1	85 80

Ubushushu bokutshintsha kweglasi (1)	ISO 11359 : 2002	°C	95
Ukutshintsha kobushushu ubushushu (1)	ISO 75Ae :2004	°C	92
Ukucutheka komgqa (1)		mm/m	2
Ubukhulu bokuphosa obuphezulu		mm	5
Ixesha lokumisa ngama-70°C	PX 245PX 245/L	imiz.	4560