Vacuum Casting Materials

PX 223/HT

I-vacuum Casting Polyurethane Resin kuMalungu oBugcisa kunye neePrototypes Flexural Modulus 2,300 Mpa – Tg 120°c

ukubuza iinkcukacha
Hei-Cast 8400

I-Hei-Cast 8400 kunye ne-8400N zizinto ezi-3 zodidi lwe-polyurethane elastomers ezisetyenziselwa ukubumba usetyenziso lwe-vacuum ezinezi mpawu zilandelayo:

(1) Ngokusetyenziswa kwe "C component" ekuqulunqweni, nabuphi na ubunzima kuluhlu lwe-A10 ~ 90 lunokufumaneka / lukhethwe.
(2) I-Hei-Cast 8400 kunye ne-8400N iphantsi kwi-viscosity kwaye ibonisa ipropati ehamba phambili.
(3) I-Hei-Cast 8400 kunye ne-8400N zonyango kakuhle kakhulu kwaye ibonisa ukuphinda-phinda okugqwesileyo.

ukubuza iinkcukacha
I-Easy Processing Vacuum Casting ABS efana ne-PX1000

Isetyenziswe ngokuphosa kwi-silicone molds ukwenzela ukufezekiswa kweengxenye zeprototype kunye ne-mock-ups ezineempawu zomatshini ezikufutshane nezo ze-thermoplastics.

Inokupeyintwa

Inkalo yeThermoplastic

Imbiza-ubomi obude

Iimpawu ezilungileyo zoomatshini

I-viscosity ephantsi

ukubuza iinkcukacha
Amandla oMechanical aPhakamileyo Ubunzima bokukhanya kweVacuum yokuCasa iPP njenge

Ukuphoswa kwemveliso yeenxalenye zeprototype kunye nezinto ezihlekisayo ezineempawu zoomatshini ezifana nePP kunye ne-HDPE, njengephaneli yesixhobo, i-bumper, ibhokisi yezixhobo, isigqubuthelo kunye nezixhobo zokulwa nokungcangcazela.

• Iikhomponenti ezi-3 ze-polyurethane zokugalela ivacuum

• Ubude obuphezulu

• Ukusetyenzwa lula

• Imodyuli yeFlexural iyahlengahlengiswa

• Ukuxhathisa impembelelo ephezulu, akukho kwaphuka

• Ukuba bhetyebhetye okulungileyo

ukubuza iinkcukacha
UkuSebenza Okulungileyo IiPropati zokuzithambisa ngeVacuum yokuCasa iPOM

Iza kusetyenziswa nge-vacuum casting kwi-silicone molds yokwenza iiprototype kunye ne-mock-ups ezineempawu zomatshini ezifana ne-thermoplastics efana ne-polyoxymethylene kunye ne-polyamide.

• High flexural modulus of elasticity

• Ukuchaneka okuphezulu kokuzala

• Ifumaneka kwireactivity emibini (4 kunye ne-8 min.)

• Inokufakwa imibala ngokulula nge-CP pigments

• Ukudilizwa ngokukhawuleza

ukubuza iinkcukacha
IiPropati eziPhakamileyo eziBanziVacuum Casting PA njenge

Iza kusetyenziswa ngokucoca i-vacuum kwi-silicone molds ukwenza iinxalenye zeprototype kunye ne-mock-ups kunye neempawu zomatshini ezifana ne-thermoplastics efana ne-polystyrene kunye ne-ABS egcweleyo.

Impembelelo entle kunye nokumelana ne-flexural

Ukwakhiwa ngokukhawuleza

Impembelelo entle kunye nokumelana ne-flexural

Ifumaneka kubomi beembiza ezimbini (imizuzu emi-4 neyesi-8)

Ukumelana okuphezulu kwe-thermal

Inokufakwa imibala ngokulula ngeCP pigments)

ukubuza iinkcukacha
I-Vacuum Casting ecacileyo ephezulu ye-PMMA

Isetyenziswa ngokuphosa kubumba lwe-silicone ukwenza iinxalenye zeprototype ecacileyo kude kube yi-10 mm ubukhulu: izibane zentloko, iglazier, nawaphi na amalungu aneempawu ezifanayo ne-PMMA, icristal PS, MABS...

• Ukusebenza elubala okuphezulu

• Ukugudisa ngokulula

• Ukuchaneka okuphezulu kokuzala

• Ukumelana kakuhle kwe-UV

• Ukusetyenzwa lula

• Ukudilizwa ngokukhawuleza

ukubuza iinkcukacha
I-High Transparency Vacuum Casting Transparent PC

Ukuphosa kwimold ye-silicone: iinxalenye zeprototype ezicacileyo kude kube yi-10 mm ubukhulu: iglasi yekristale efana namalungu, ifashoni, ubucwebe, ubugcisa kunye neenxalenye zokuhombisa, iilensi zezibane.

• Ukucaca okuphezulu (ukucoceka kwamanzi)

• Ukugudisa ngokulula

• Ukuchaneka okuphezulu kokuzala

• Ukuxhathisa okuhle kwe-U. V

• Ukusetyenzwa lula

• Ukuzinza okuphezulu phantsi kobushushu

ukubuza iinkcukacha