Okugqwesileyo kokuNgaphandle kwe-SLA Resin PMMA njenge-KS158T2e

Okugqwesileyo kokuNgafihlisi kwe-SLA Resin PMMA njenge-KS158T2e Umfanekiso obonakalayo

Inkcazelo emfutshane:

Material Overview
I-KS158T yi-resin ye-SLA ecacileyo ngokukhawuleza yokuvelisa iindawo ezicacileyo, ezisebenzayo kunye nezichanekileyo kunye nokubonakala kwe-acrylic.Iyakhawuleza ukwakha kwaye kulula ukuyisebenzisa.Esona sicelo sifanelekileyo ziindibano ezicacileyo, iibhotile, iityhubhu, iilensi zemoto, izinto zokukhanyisa, uhlalutyo lokuhamba kwamanzi kunye nokunye, kunye neeprototypes ezinzima ze-funcitonal.

Thumela i-imeyile kuthi Ukukhuphela iPhepha leDatha

Iinkcukacha zeMveliso

Iithegi zeMveliso

I-datasheet yobuGcisa

- Ukucaca okugqwesileyo

- Ukufuma okugqwesileyo kunye nokumelana nokufuma

-Ukwakha ngokukhawuleza kwaye kulula ukugqiba

- Ichanekile kwaye izinzile ngokwemilinganiselo

Izicelo ezifanelekileyo

- Iilensi zeemoto

- Iibhotile kunye neetyhubhu

- Iiprototypes ezisebenzayo ezinzima

-Iimodeli zokubonisa ekuhleni

- Uhlalutyo lokuqukuqela kolwelo

Iphepha leDatha lobuGcisa

Iipropati zolwelo		IiPropathi zokubona
Imbonakalo	Cacileyo	Dp	0.135-0.155 mm
Viscosity	325 -425cps @ 28 ℃	Ec	9-12 mJ/cm2
Ukuxinana	1.11-1.14g/cm3 @ 25 ℃	Ubungqingqwa bomaleko wokwakha	0.1-0.15mm

IiPropati zoomatshini		UV Postcure
UMLINGANISO	INDLELA YOVAVANYO	VALUE
Ubunzima, Unxweme D	I-ASTM D 2240	72-78
Flexural modulus, Mpa	I-ASTM D 790	2,680-2,775
Amandla e-Flexural, uMpa	I-ASTM D 790	65- 75
Imodyuli yokuqina , MPa	I-ASTM D 638	2,170-2,385
Amandla okuqina, MPa	I-ASTM D 638	25-30
Ukwandisa ngexesha lekhefu	I-ASTM D 638	12 -20%
Amandla empembelelo, inotched lzod, J/m	I-ASTM D 256	58 - 70
Ubushushu bokutshintsha ubushushu, ℃	I-ASTM D 648 @66PSI	50-60
Utshintsho lweglasi, Tg	DMA, E”incopho	55-70
Ubuninzi , g/cm3		1.14-1.16

Ubushushu obucetyiswayo bokulungiswa kunye nokugcinwa kweresin engentla kufuneka ibe yi-18 ℃-25 ℃
Le datha ingentla isekelwe kulwazi lwethu lwangoku kunye namava, amaxabiso anokuthi ahluke kwaye axhomekeke ekusebenzeni komatshini ngamnye kunye nezenzo zokunyanga emva kokunyanga.Idatha yokhuseleko enikwe apha ngasentla yeyolwazi kuphela kunye
ayimeli iMSDS ebophelela ngokusemthethweni.

Ngaphambili: UMvelisi oKhokelayo kwi-Resin ye-SLA eNgaphandle-Ukusebenza kakuhle kwe-Welding ye-SLM yeNtsimbi yeNtsimbi eyi-316L-JS ADDITIVE

Okulandelayo: I-SLA Resin Rubber njenge-White ABS njenge-KS198S