Eyona nto igqwesileyo iVacuum Casting PMMA

Eyona Mathiriyeli Vacuum Casting PMMA Umfanekiso Featured

Inkcazelo emfutshane:

Isetyenziswa ngokuphosa kubumba lwesilicone ukwenza iinxalenye zeprototype ecacileyo kude kube yi-10 mm ubukhulu: izibane zentloko, iglazier, nawaphi na amalungu aneempawu ezifanayo ne-PMMA, icristal PS, MABS...

• Ukusebenza elubala okuphezulu

• Ukugudisa ngokulula

• Ukuchaneka okuphezulu kokuzala

• Ukumelana kakuhle kwe-UV

• Ukusetyenzwa lula

• Ukudilizwa ngokukhawuleza

Thumela i-imeyile kuthi Ukukhuphela iPhepha leDatha

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ukuqamba		ISOCYANATE PX 521HT A	POLYOL PX 522HT B	MIXING
Ukuxuba umlinganiselo ngobunzima		100	55
Umba		ulwelo	ulwelo	ulwelo
Umbala		elubala	buluhlaza	elubala*
Viscosity kwi-25°C (mPa.s)	Brookfield LVT	200	1,100	500
Ukuxinana kwamalungu phambi kokuxuba Ubuninzi bemveliso enyangisiweyo	ISO 1675: 1985ISO 2781: 1996	1.07-	1.05-	-1.06
Ubomi bembiza kwi-25°C kwi-155g (min)	-			5 - 7

*I-PX 522 ifumaneka nge-orenji (PX 522HT OE Inxalenye B) kwaye ibomvu (PX 522HT RD Ingxenye B)

Iimeko zokuLungisa iVacuum Casting

• Sebenzisa kumatshini wokufunxa.

• Fudumeza i-mold kwi-70 ° C (ekukhethwa ukuba i-polyaddition silicon mold).

• Fudumeza omabini la malungu nge-20°C xa uwagcina kumaqondo obushushu asezantsi.

• Beka umlinganiselo wecandelo A kwikomityi ephezulu (ungalibali ukuvumela intsalela yenkunkuma yekomityi).

• Viyisha icandelo B kwikomityi esezantsi (kwikomityi yokuxuba).

• Emva kokucoca imizuzu eli-10 phantsi kwevacuum galela inxalenye A kwinxalenye B uze udibanise umzuzu om-1 nama-30 ukuya kwimizuzu emi-2.

• Faka kwi-silicone ukungunda, ngaphambili ifudunyezwe kwi-70 ° C.

• Faka kwi-oven ekwi-70°C ubuncinane.

• Ithotywa emva kwemizuzu engama-45 nge-70°C.

• Yenza olu nyango lulandelayo lwe-thermal: 3 hr ku-70°C + 2 hr ku-80°C kunye ne-2hr kwi-100°C.

• Ngalo lonke ixesha xa unyanga, beka indawo kwindawo yokumisa.

Ukuphatha imiGaqo

Izithintelo zempilo kunye nokhuseleko eziqhelekileyo kufuneka ziqwalaselwe xa uphethe ezi mveliso :

• qinisekisa ukungena komoya kakuhle

• nxiba iiglavu kunye neendondo zokhuseleko

Ngolwazi oluthe vetshe, nceda uqhagamshelane nephepha ledatha yokhuseleko lwemveliso.

Imodyuli yeFlexural	ISO 178 : 2001	MPa	2.100
Amandla e-Flexural	ISO 178 : 2001	MPa	105
Imodyuli yokuqina	ISO 527 : 1993	MPa	2.700
Tensile strength	ISO 527 : 1993	MPa	75
Ukwandiswa ngexesha lekhefu kuxinzelelo	ISO 527: 1993	%	9
Amandla empembelelo yeCharpy	ISO 179/1 EU : 1994	kJ/m2	27
Ubulukhuni bokugqibela	ISO 868 : 2003	Unxweme D1	87

Utshintsho lobushushu beglasi (Tg)	ISO 11359 : 2002	°C	110
Ubushushu bokutshintsha kobushushu (HDT 1.8 MPa)	ISO 75 Ae :1993	°C	100
Ubukhulu bokuphosa obuphezulu		mm	10
Ixesha lokudiliza kwi-70°C (ukutyeba yi-3 mm)		imiz.	45

Ubomi beshelufu yawo omabini la malungu ziinyanga ezili-12 kwindawo eyomileyo kwaye kwizikhongozeli zazo zokuqala ezingavulwanga kubushushu obuphakathi kwe-15 kunye ne-25°C.

Nayiphi na inkonkxa evulekileyo kufuneka ivalwe ngokuqinileyo phantsi kwenitrogen eyomileyo.

Ngaphambili: I-Vacuum ePheleleyo ephezulu yokuCasa iPC eNgaphandle

Okulandelayo: UkuSebenza Okulungileyo IiPropati zokuzithambisa ngeVacuum yokuCasa iPOM