Ukusebenza Okuhle Izakhiwo Ezizigcoba Ngayo I-Vacuum Casting POM

Ukusebenza Okuhle Izakhiwo Ezizigcoba Ngayo Ivacuum Ukusakaza kwe-POM Isithombe Esifakiwe

Incazelo emfushane:

Izosetshenziswa ngokusakazwa kwe-vacuum ekubunjweni kwe-silicone ukwenza izingxenye ze-prototype kanye nokuhlekwa ngezakhiwo ezisebenza ngomshini ezifana ne-thermoplastics njenge-polioxymethylene ne-polyamide.

• High flexural modulus of nokunwebeka

• Ukunemba okuphezulu kokukhiqiza

• Itholakala ku-reactivity ezimbili (4 kanye ne-8 min.)

• Ingafakwa umbala kalula nge-CP pigments

• Ukudiliza ngokushesha

Thumela i-imeyili kithi Ukulanda Ishidi Ledatha

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

			INGXENYE APX 245	INGXENYE B PX 245 - 245/L	MIXING
Ukwakheka			II-SOCYANATE	IPOLYOL
Ukuhlanganisa isilinganiso ngesisindo			100	40
Isici			uketshezi	uketshezi	uketshezi
Umbala	I-PX 245/BPX 245/LB		impunga	luhlaza okwesibhakabhaka	ayisekho mhlophe
I-Viscosity ku-25°C (mPa.s)		Izindleko zamasheya BROOKFIELD LVT	800	1,000	2,200 (2)
Amandla adonsela phansi athile ku-25°C Amandla adonsela phansi athile ku-23°C		ISO 1675 :1985ISO 2781 :1996	1.34-	1.10-	-1.22
Impilo yebhodwe ku-25°C ku-140g (amaminithi.)		PX 245PX 245/L			4 8

Imibandela Yokucubungula I-Vacuum Casting

• Shisisa zombili izingxenye (i-isocyanate ne-polyol) ku-23°C uma zigcinwa ezingeni lokushisa eliphansi.

• Okubalulekile : Nyakazisa ngamandla ingxenye A ngaphambi kokukala ngakunye.

• Kala izingxenye zombili.

• Ngemva kokukhipha umoya imizuzu eyi-10 ngaphansi kwe-vacuum mix for

Iminithi elingu-1 nge-PX 245

2 amaminithi nge-PX 245/L

• Faka ngaphansi kwe-vacuum kusikhunta se-silicone, ngaphambilini ebishiswe ku-70°C.

• Khipha ngemva kwemizuzu engama-30 ubuncane ku-70°C (vumela ingxenye ukuthi iphole ngaphambi kokudilizwa).

Ukuphatha Izinyathelo Zokuqapha

Izinyathelo ezijwayelekile zempilo nokuphepha kufanele zibhekwe lapho uphatha le mikhiqizo:

• qinisekisa ukungena komoya okuhle

• Gqoka amagilavu nezibuko zokuphepha

Ukuze uthole ulwazi olwengeziwe, sicela ubheke ishidi ledatha yokuphepha komkhiqizo.

I-Flexural modulus ye-elasticity		ISO 178 :2001	I-MPa	4,500
Amandla e-Flexural		ISO 178 :2001	I-MPa	150
Amandla aqinile		ISO 527 :1993	I-MPa	85
Ukwelula ngesikhathi sekhefu		ISO 527 :1993	%	3
Amandla womthelela we-Charpy		ISO 179/1eU :1994	kJ/m2	30
Ukuqina	- ku-23°C - ku-80°C	ISO 868 :2003	Ugu D1	85 80

Izinga lokushisa lengilazi (1)	ISO 11359: 2002	°C	95
Izinga lokushisa elishintshashintshayo (1)	ISO 75Ae :2004	°C	92
Ukuncipha komugqa (1)		mm/m	2
Ubukhulu bokulingisa obukhulu		mm	5
Isikhathi sokudiliza ku-70°C	PX 245PX 245/L	imiz.	4560