I-High Temperature Ressitance SLA Resin ABS efana ne-KS1208H

Incazelo emfushane:

Uhlolojikelele Lwempahla

I-KS1208H iyinhlaka ye-SLA ekwazi ukumelana nokushisa okuphezulu ene-viscosity ephansi ngombala ocwebezelayo.Ingxenye ingasetshenziswa ngokushisa okungaba ngu-120 ℃.Ukuze izinga lokushisa elisheshayo likwazi ukumelana nangaphezulu kuka-200 ℃.Inokuqina okuhle kobukhulu kanye nemininingwane engaphezulu kwendawo, okuyisixazululo sobuso bezingxenye ezidinga ukumelana nokushisa nokuswakama, futhi iyasebenza nasesikhunjeni esisheshayo esinezinto ezithile ekukhiqizweni kwenqwaba encane.

Thumela i-imeyili kithi Ukulanda Ishidi Ledatha

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Izinzuzo

Ukumelana nokushisa okuphezulu

Ukuzinza kwe-dimensional okuhle kakhulu

Amandla aphezulu nokunemba

Izicelo Ezikahle

Ama-prototypes adinga ukumelana nezinga lokushisa eliphezulu

Isikhunta esisheshayo

Ishidi ledatha yezobuchwepheshe

I-Liquid Properties		Izakhiwo ze-Optical
Ukubukeka	I-Semi-translucent	I-Dp	13.5 mJ/cm2	[ukuchayeka okubalulekile]
I-Viscosity	340 cps@30℃	Ec	0.115 mm	[slope of cure-depth vs. In (E) curve]
Ukuminyana	1.14 g/cm3	Ugqinsi lwesendlalelo sokwakha	0.08-0.12 mm

Izakhiwo zemishini		Ukwelashwa kwe-UV post
Izinto zokuhlola	Izindlela Zokuhlola	Inani lenombolo	Izindlela Zokuhlola	Inani lenombolo
Amandla Okuqina	I-ASTMD 638	65MPa	I-GB/T1040.1-2006	71MPa
Ukwandisa ngesikhathi sekhefu	I-ASTMD 638	3-5%	I-GB/T1040.1-2006	3-5%
Amandla okugoba	I-ASTMD 790	110MPa	I-GB/ T9341-2008	115MPa
I-Flexural modulus	I-ASTMD 790	2720MPa	I-GB/ T9341-2008	2850MPa
Amandla womthelela we-Izod	I-ASTMD 256	20J/m	I-GB/T1843-2008	25J/m
Ukuqina kogu	I-ASTMD 2240	87D	I-GB/T2411-2008	87D
Izinga lokushisa lokushintsha kwengilazi	I-DMA, i-tan θ isiqongo	135℃
I-Thermal Expansion Coefficient (25-50℃)	I-ASTME831-05	50 µ m/m℃	I-GB/T1036-89	50 µ m/m℃
I-Thermal Expansion Coefficient (50-100℃)	I-ASTME831-05	150 µ m/m℃	I-GB/T1036-89	160 µ m/m℃

Izinga lokushisa elinconyiwe lokucubungula nokugcinwa kwe-resin engenhla kufanele libe ngu-18℃-25℃.

1e aoned te tcreo orertlroleoep ndecerece.rhe syes d wbah ma ey dpnton nbirdualrmathrero.srg reorot-rg rcices.I-shet es gie in aboe sfor niometon purpsis ry andovs rot cortitutealeal bnig MS.

Okwedlule: Okudumile kwe-3D Print SLA Resin ABS njengoBrown KS908C

Olandelayo: Amandla Aqondile Aphakeme we-SLM Titanium Alloy Ti6Al4V