PROCESSING
Weigh according to the indicated ratio. Mix until a homogeneous and transparent mixing is obtained.
Degas for 5 minutes.
Cast in a silicone mould at room temperature or pre-heated at 35 - 40°C to accelerate the process.
After demoulding cure 2 hours at 70°C in order to obtain the optimal properties.
PRECAUTIONS
Normal health and safety precautions should be observed when handling these products :
. ensure good ventilation
. wear gloves and safety glasses
For further information, please consult the product safety data sheet.
| AXSON France | AXSON GmbH | AXSON IBERICA | AXSON ASIA | AXSON JAPAN | AXSON SHANGHAI | ||
| BP 40444 | Dietzenbach | Barcelona | Seoul | OKAZAKI CITY | Zip: 200131 | ||
| 95005 Cergy Cedex | Tel. (49) 6074407110 | Tel. (34) 932251620 | Tel. (82) 25994785 | Tel.(81)564262591 | Shanghai | ||
| FRANCE | Tel. (86) 58683037 | ||||||
| Tel. (33) 134403460 | AXSON Italie | AXSON UK | AXSON MEXICO | AXSON NA USA | Fax.(86) 58682601 | ||
| Fax (33) 134219787 | Saronno | Newmarket | Mexico DF | Eaton Rapids | E-mail: shanghai@axson.cn | ||
| Email : axson@axson.fr | Tel. (39) 0296702336 | Tel. (44)1638660062 | Tel. (52) 5552644922 | Tel. (1) 5176638191 | Web: www.axson.com.cn | ||
MECHANICAL PROPERTIES AT 23°C AFTER HARDENING
| Flexural modulus of elasticity | ISO 178 :2001 | MPa | 1,500 | |
| Maximal flexural strength | ISO 178 :2001 | MPa | 55 | |
| Maximal tensile strength | ISO 527 :1993 | MPa | 40 | |
| Elongation at break | ISO 527 :1993 | % | 20 | |
| CHARPY impact strength | ISO 179/2D :1994 | kJ/m2 | 25 | |
| Hardness | - at 23°C | ISO 868 :1985 | Shore D1 | 74 |
| - at 80°C | 65 | |||
Industries with SLS 3D Printing
| Glass temperature transition (1) |
TMA METTLER |
°C |
75 |
| Linear shrinkage (1) |
- |
mm/m |
4 |
| Maximal casting thickness |
- |
Mm |
5 |
| Demoulding time @ 23°C |
- |
Hours |
4 |
| Complete hardening time @ 23°C |
- |
days |
4 |
(1) Average values obtained on standard specimens/Hardening 12 hr at 70°C
STORAGE
Shelf life is 6 months for PART A (Isocyanate) and 12 months for PART B (Polyol) in a dry place and in original unopened containers at a temperature between 15 and 25° C. Any open can must be tightly closed under dry nitrogen blanket.
GUARANTEE
The information of our technical data sheet are based on our present knowledge and the result of tests conducted under precise conditions. It is the responsibility of the user to determine the suitability of AXSON products, under their own conditions before commencing with the proposed application. AXSON refuse any guarantee about the compatibility of a product with any particular application. AXSON disclaim all responsibility for damage from any incident which results from the use of these products. The guarantee conditions are regulated by our general sale conditions.
