Takardar bayanan Fasaha
- Kyakkyawan nuna gaskiya
- Kyakkyawan zafi da juriya na danshi
- Mai sauri don ginawa da sauƙin fifinish
- Madaidaici kuma daidaitacce
Ingantattun Aikace-aikace
- Motoci ruwan tabarau
- kwalabe da bututu
- Tauri samfurin aiki
- Samfuran nuni masu haske
- Binciken kwararar ruwa
Takardar bayanan fasaha
| Abubuwan Ruwa | Kayayyakin gani | ||
| Bayyanar | Share | Dp | 0.135-0.155 mm |
| Dankowar jiki | 325-425cps @ 28 ℃ | Ec | 9-12mJ/cm2 |
| Yawan yawa | 1.11-1.14g/cm3 @ 25 ℃ | Gine-gine kauri | 0.1-0.15mm |
| Kayayyakin Injini | UV Postcure | |
| AUNA | HANYAR GWADA | DARAJA |
| Hardness, Shore D | Saukewa: ASTM D2240 | 72-78 |
| Modules mai sassauci, Mpa | Saukewa: ASTM D790 | 2,680-2,775 |
| Ƙarfin sassauƙa , Mpa | Saukewa: ASTM D790 | 65-75 |
| Modules tensile, MPa | Saukewa: ASTM D638 | 2,170-2,385 |
| Ƙarfin ɗaure, MPa | Saukewa: ASTM D638 | 25-30 |
| Tsawaitawa a lokacin hutu | Saukewa: ASTM D638 | 12-20% |
| Ƙarfin tasiri, ƙwanƙwasa lzod, J/m | Bayani na ASTM D256 | 58-70 |
| Zafin karkatar da zafi, ℃ | ASTM D 648 @ 66PSI | 50-60 |
| Canjin Gilashi, Tg | DMA, E” kololuwa | 55-70 |
| Yawan yawa, g/cm3 | 1.14-1.16 | |
Yawan zafin jiki da aka ba da shawarar don aiki da ajiya na guduro na sama yakamata ya zama 18 ℃-25 ℃
Bayanan da ke sama sun dogara ne akan iliminmu da gogewarmu na yanzu, waɗanda ƙimarsu na iya bambanta kuma sun dogara da aikin sarrafa injin guda ɗaya da ayyukan bayan-warkarwa.Bayanan aminci da aka bayar a sama don dalilai ne na bayanai kawai kuma
ba ya zama MSDS mai ɗaure bisa doka.
