Mpempe akwụkwọ nka nka
- Nghọta dị oke mma
- Magburu onwe iru mmiri na mmiri na-eguzogide
- Ngwa ngwa wuo ma dị mfe fifinish
- ziri ezi na akụkụ kwụsiri ike
Ngwa dị mma
- Akpa anya anyanya
- karama na tubes
- Ụdị ụdị ọrụ siri ike
- ụdị ngosi ngosi
- Nyocha mmiri na-asọ asọ
Nka na ụzụ data-akwụkwọ
| Njirimara Liquid | Ngwa anya | ||
| Ọdịdị | Kpochapụ | Dp | 0.135-0.155 mm |
| Viscosity | 325 -425cps @ 28 ℃ | Ec | 9-12 mJ/cm2 |
| Njupụta | 1.11-1.14g/cm3 @ 25 ℃ | Ụlọ oyi akwa ọkpụrụkpụ | 0.1-0.15mm |
| Ihe eji arụ ọrụ | UV Postcure | |
| Nhazi | UZỌ anwale | URU |
| Hardness, Shore D | ASTM D2240 | 72-78 |
| Mgbanwe mgbanwe, Mpa | ASTM D790 | 2,680-2,775 |
| Ike mgbanwe , Mpa | ASTM D790 | 65-75 |
| modul tensile, MPa | ASTM D638 | 2,170-2,385 |
| Ike tensile, MPa | ASTM D638 | 25-30 |
| Elongation na ezumike | ASTM D638 | 12-20% |
| Ike mmetụta, ọpụrụiche lzod, J/m | ASTM D256 | 58-70 |
| Okpomọkụ mgbapụ, ℃ | ASTM D 648 @66PSI | 50-60 |
| Ntugharị iko, Tg | DMA,E” kacha | 55-70 |
| Njupụta, g/cm3 | 1.14-1.16 | |
Na-atụ aro okpomọkụ maka nhazi na nchekwa nke resin n'elu kwesịrị 18 ℃-25 ℃
Ihe data dị n'elu dabere na ihe ọmụma na ahụmịhe anyị ugbu a, ụkpụrụ nke nwere ike ịdịgasị iche ma dabere na nhazi igwe onye ọ bụla na usoro ọgwụgwọ mgbe ọ gasịrị.Data nchekwa enyere n'elu bụ naanị maka ebumnuche ozi yana
anaghị emepụta MSDS na-ejikọta iwu.
