SLA Resin mmiri mmiri photopolymer PP dị ka White Somos® 9120

Nkọwa dị mkpirikpi:

Nchịkọta ihe

Somos 9120 bụ photopolymer mmiri mmiri na-emepụta akụkụ siri ike, arụ ọrụ na nke ziri ezi site na iji igwe stereolithography.Ngwa ahụ na-enye nguzogide kemịkalụ dị elu na latitude nhazi sara mbara.Site na ihe eji arụ ọrụ nke na-eṅomi ọtụtụ plastik injinia, akụkụ ndị sitere na Somos 9120 na-egosipụta njirimara ike ọgwụgwụ dị elu, njigide ebe nchekwa siri ike na elu elu na-eche ihu ihu.Ọ na-enyekwa ezigbo nguzozi nke akụrụngwa n'etiti siri ike na arụ ọrụ.Ihe a na-abakwa uru n'ịmepụta akụkụ maka ngwa ebe ịdịte aka na ike dị mkpa dị mkpa (dịka ọmụmaatụ, akụrụngwa ụgbọ ala, ụlọ eletrọnịkị, ngwaahịa ahụike, nnukwu ogwe na akụkụ snap-fit).

Zitere anyị email Nbudata mpempe akwụkwọ data

Nkọwa ngwaahịa

Mkpado ngwaahịa

Uru

Ọ dị mfe ihicha & mechaa

Ike dị elu & ịdịte aka

ezi itule nke Njirimara n'etiti rigidity na arụmọrụ

elu chemical iguzogide

Ngwa dị mma

akụrụngwa ụgbọala

ụlọ eletrọnịkị

ngwaahịa ọgwụ

nnukwu ogwe na akụkụ nke dabara adaba

Nka na ụzụ data-akwụkwọ

Njirimara LiquiD		Njirimara Optical
Ọdịdị	Nchapụ ọcha	Dp	5.6 nde	[slope of cure-depth vs. Na (E) mgbanaka]
Viscosity	~450 cps @ 30°C	Ec	10.9mJ/cm²	[mkpughe dị mkpa]
Njupụta	~1.13g/cm3 @ 25°C	Ụlọ oyi akwa ọkpụrụkpụ	0.08-0.012mm

Mechanical Njirimara		UV Postcure		polypropylene *
Usoro ASTM	Nkọwa ihe onwunwe	Metric	Imperial	Metric	Imperial
D638M	Ike ọdụdọ	30-32 MPa	4.4 - 4,7 ksi	31-37.2 MPa	4.5 - 5.4 ksi
D638M	Mgbatị na Mpụta	15-25%	15-21%	7-13%	7-13%
D638M	Modul nke Young	1,227 - 1,462 MPa	178 - 212 ksi	1,138 - 1,551 MPa	165 - 225 ksi
D790M	Ike Flexural	44-46 MPa	6.0 - 6.7 ksi	41-55 MPa	6.0 - 8.0 ksi
D790M	Modul Flexural	1,310 - 1,455 MPa	190-210 ksi	1,172 - 1,724 MPa	170-250 ksi
D2240	Isi ike (Oké Osimiri D)	80-82	80-82	N/A	N/A
D256A	Mmetụta Izod (Achọpụtara)	48 - 53 J/m	0.9-1.0 ft-lb/in	21-75 J/m	0.4-1.4 ft-lb/in
D648-07	Okpomọkụ ngbanwe	52-61 Celsius C	126-142°F	107-121 Celsius C	225-250°F