Hand Polished
This is a method applicable to all kinds of 3D prints. However, manual polishing of metal parts is laborious and time-consuming.
Sandblasting
One of the commonly used metal polishing ...
Introduction of Vacuum Casting
Vacuum casting or silicon mould refers to the use of the original prototype, the production of silicone mould in a vacuum state, and the use of soft materials (TPU), ...
As the two most common 3D printing processes, FDM and SLA printing are widely used in different industrial fields.
FDM is a 3D printing technology based on the principle of melt deposition, which u...
After the prototype has been formed in the liquid resin, the lifting table lifts it out of the liquid and removes it and starts the post-treatment such as finishing and sanding. A thin spatula is i...
The hardware part of the light curing forming system is mainly composed of laser, optical path system (component 1-6 in Figure), scanning irradiation system (component 7 in Figure) and layering cur...
As 3D printing technology proliferates, the implications for intellectual property (IP) rights are becoming increasingly significant. The ability to easily replicate designs raises concerns about c...